Eurotrek x4 Tech Features Fittings Photos Contact us

GENERAL TECHNICAL CHARACTERISTICS 

eurotrek x4

Data, measures and weights are indicative and not firm. Changes can be made without notice. 

DIMENSIONS DIFFERENTIALS TYRES
PERFORMANCE CHASSIS ELECTRIC SYSTEM
WEIGHTS CAB FUEL TANK
ENGINE SUSPENSIONS POWER TAKEOFFS
GEARBOX BRAKES TOW HOOK
REDUCTION GEARBOX WHEELS OPTIONALS

 

 

DIMENSIONS

dimensions
dimensions
Wheel base 2,350 mm
Track front - rear 1,511 / 1,518 mm
Minimum ground clearance 300 mm
Turning radius 4,800 mm
Load platform 2,700 x 1,800 mm
Maximum height 2,350 mm
Maximum length 4,400 mm
Maximum width 1,850 mm
Fording capacity 750 mm
Coupling angles front. centre. rear. 45° / 140° / 45°

 

PERFORMANCE
Speed at maximum power min 2.5 - max 100 km/h
Consumption (CUNA standards) lt. 15/100 km
Climbing ability 80% ÷ 100%

 

WEIGHTS
Max. loaded weight 3,500 kg
Front – Rear 1,900 - 3,400 kg
Unloaded weight 2,400 kg
Front – Rear 1,650 - 750 kg
Carrying capacity 1,100 kg
Towing capacity 2,500 kg

 

ENGINE (see graph)
SOFIM 8140.23/A1 supercharged with special applications for off-road use.
. Diesel - 4 cylinder, 4 stroke, water cooled with heat exchanger.
Displacement 2,800 cc
Bore per stroke 94.4 x 100 mm
Max. effective HP 103 HP (76 KW) a 3,600 rpm
Max. effective torque 240 Nm a 1,900 rpm
Supercharger turboblower GARRET or MITSUBISHI

 

GEARBOX (see image)
IVECO 2826.5 with 5 gears + REVERSE

 

REDUCTION - TRANSFER GEARBOX
With 2 ratios. 10 forward gears (5 normal + 5 low ratio) and 2 reverse.
Front drive connection can be engaged at any speed.
Device for engaging synchronised low ratio gears which can be engaged with vehicle in motion.

 

DIFFERENTIALS
Three : Front - Rear - Central.
All equipped with total locking device.
Central locking system standard .

 

CHASSIS (see image)
Made up of HS-FORM 420 steel side members connected together by 8 mm thick crosspieces.
Impact absorbing front section.

 

CAB (see image)
Two seater, mounted on chassis using flexible mountings.
Soundproofed internally, roof panel and floor covered with insulating material. Heater with radiator and two speed electric fan.
Two speed windscreen wipers.
Seats adjustable vertically and lengthways.
Seat belts.

 

SUSPENSIONS
Rigid axles.
Steel leaf springs, also in version with parabolic profile.
Double action front and rear shock absorbers.
Elastic stops.

 

BRAKES
Power assisted.
Front disk brakes - Rear drum brakes.
Independent front and rear hydraulic circuits.
Mechanical parking brake acting on rear wheels.

 

WHEELS
Rims 6.50 H 16 sdc.

 

TYRES
9.00 R 16 MICHELIN standard.

 

ELECTRIC SYSTEM
Voltage 12 V.
Battery 100 Ah. 
Alternator 12 V. 55 A.

 

FUEL TANK
90 Litres, with valve for off-road.

 

POWER TAKE-OFF FITTING
One mechanical at the rear, power output 82 HP = 60Kw.
Three hydraulic (front. central and rear) with possibility of assembling pumps with capacities of from 4 to 80 lt./min.

 

TOW HOOK
Rear. Cl. II approved with electric outlet.

 

OPTIONAL EQUIPMENT
Mechanical power take-off
Hydraulic power take-off
Differential locking: front and rear
Front tow hook
Winch
Air conditioning
Supplementary rear heating
Electronic rev counter
Hour counter
Sun roof
Various appliances
Double shock absorbers
Stop tie rods
Ball tow hook.
 

TEKNOCAR s.r.l.
Via dei Santi, 119 - 25014 Castenedolo (BS)
TEL. 030-230.29.23  FAX 030-231.10.92